Skoda Felicia

1. Prop up wedges back wheels, firmly cock the parking brake, then a front of the car and establish to a poddomkratta it on props. Remove the corresponding forward wheel.

2. Give a nut of fastening of a rack of a bar of the stabilizer to the lower lever of a suspension bracket, remove a washer and the lower pillow of a support.

3. Release a rack from the lower lever, then remove the top pillow of a support with a washer. Now the rack can be removed from the end of a stabilizer bar.
4. Check rack components for existence of signs of wear and mechanical damages. Special attention should be paid to a condition of rubber pillows of support and plugs. Replace defective components.

1. Put on a rack a stabilizer bar, establish a washer and a rubber pillow of the top support.
2. Bring a rack to the lower lever of a suspension bracket, establish a rubber pillow and a washer of the lower support. Screw a fixing nut. Make sure of correctness of provision of a rack, then tighten a nut with the required effort.
3. Establish into place a wheel, lower the car on the earth and tighten wheel bolts with the required effort.