Skoda Felicia

since 1994 release

Repair and operation of the car



Skoda Felicia
+ Cars of the Skoda Felicia brand
+ Maintenance instruction
+ Routine maintenance
+ Repair of the engine
+ Cooling systems, heating
+ Power supply system
+ Engine electric equipment
+ Coupling
+ Transmission
+ Power shafts
+ Brake system
- Suspension bracket and steering
   General information and precautionary measures
   Removal and installation of stupichny assemblies of forward wheels
   Replacement of bearings of forward wheels
   Removal and installation of racks of a forward suspension bracket
   Capital repairs of racks of a forward suspension bracket
   Removal, capital repairs and installation of the lower levers of a forward suspension bracket
   Replacement of spherical support of the lower levers of a forward suspension bracket
   Removal and installation of the stabilizer of cross stability of a forward suspension bracket
   Removal and installation of racks of a bar of the stabilizer of cross stability of a forward suspension bracket
   Removal and installation of a forward stretcher
   Replacement of bearings of back naves
   Removal, capital repairs and installation of racks of a back suspension bracket
   Capital repairs of racks of a back suspension bracket
   Removal, capital repairs and installation of pins of the back bridge
   Removal and installation of the back stabilizer of cross stability
   Removal and installation of the back bridge
   Removal and installation of a steering wheel
   Removal and installation of a steering column
   Capital repairs of a steering column
   Removal and installation of assembly of the lock of ignition/blocking of a wheel
   Removal, capital repairs and installation of the steering mechanism
   Replacement of rubber protective covers of a case of the steering mechanism
   Removal of air traffic jams from a hydraulic path of system of strengthening of a wheel
   Removal and installation of the steering pump
   Removal and installation of external tips of steering drafts
   Removal and installation of steering draft
   The angles of installation of wheels of the car - the general information
+ Body and finishing of salon
+ Onboard electric equipment



Replacement of spherical support of the lower levers of a forward suspension bracket

REMOVAL

 PERFORMANCE ORDER

At assembly of the car spherical support priklepyvatsya to the lower levers of a suspension bracket. In the course of service of the car of a rivet are replaced with bolted fixture.

1. Remove the lower lever of a suspension bracket (see the Section Removal, capital repairs and installation of the lower levers of a forward suspension bracket).
2. Clamp the lever in a vice and drill heads of rivets of fastening on it a spherical support. A drift push out cores of rivets and remove a support from the lever.

INSTALLATION

 PERFORMANCE ORDER

1. Install a new spherical support on the lever, from above insert into openings from under rivets fixing bolts. Screw nuts and tighten them with the required effort.
2. Install the lower lever on the car (see the Section Removal, capital repairs and installation of the lower levers of a forward suspension bracket).