Skoda Felicia

1. Establish forward wheels of the car in rectilinear situation and block a steering column.
2. Having accurately hooked the small screw-driver with a flat sting, release the horn button from a stupichny part of a steering wheel. Disunite the electric socket and remove the button.
3. Give a nut of fastening of a steering wheel. Remove a washer.
4. Mark the provision of a wheel concerning a shaft of a steering column, then remove a wheel in the pin equipped with vents.

If the wheel is put hardly and does not give in to removal, on it a palm, or pull to the right-to the left, at the same time delaying up.

Installation is made upside-down. Pay attention to the next moments:
a) Before installation expose the lever of the understeering switch of indexes of turns in the central situation, otherwise indexes will automatically not be disconnected upon completion of turn;
b) Track correctness of combination of the landing tags put in the course of dismantle. Tighten a nut of fastening of a steering wheel strictly with the required effort.
The models equipped with a safety cushion

Before removal of a steering wheel study the preventions concerning observance of precautionary measures provided in the Head Onboard electric equipment of the present manual.

1. Remove assembly of a safety cushion (see the Head Onboard electric equipment).
2. Establish forward wheels of the car in rectilinear situation, then block a steering column in this situation, having taken out a key from the ignition lock.
3. Turn out the fixing screw in the top part of the lower casing of a steering column. Lower a casing, release it from clamps and remove from the car.

4. Walk on a safety cushion block electrical wiring to the socket. Disunite the socket that conducting could be removed together with a steering wheel.

5. Give a fixing nut, remove a washer and mark the provision of a steering wheel concerning a column shaft.

6. Remove a steering wheel from the shaft pin equipped with vents. Try not to damage an electrical wiring. If the wheel is put hardly and does not give in to removal, on it a palm, or pull to the right-to the left, at the same time delaying up.

Installation is made upside-down. Pay attention to the next moments:

a) Before installation expose the lever of the understeering switch of indexes of turns in the central situation, otherwise indexes will automatically not be disconnected upon completion of turn;
b) Before installation of a steering wheel make sure that forward wheels of the car are in rectilinear situation. Track correctness of combination of the landing tags put in the course of dismantle. Tighten a nut of fastening of a steering wheel strictly with the required effort;
c) Track correctness of laying of an electrical wiring and reliability of connection of the socket of the block of a safety cushion, having only made sure that everything is all right, start installation a casing of a steering column;
d) In conclusion establish into place assembly of a safety cushion (see the Head Onboard electric equipment).