Removal and installation of the back stabilizer of cross stability
At assembly new nuts of fixing bolts will be required. Removal
REMOVAL
PERFORMANCE ORDER
1. Prop up wedges forward wheels, then a back of the car and establish to a poddomkratta it on props.
2. Give nuts of bolts of fastening of anchor plates of a bar of the stabilizer of cross resistance to the lower part of the bridge. Remove both plates and take a stabilizer bar from under the car.
INSTALLATION
PERFORMANCE ORDER
1. Get a stabilizer bar on the regular place and fix it by anchor brackets. Do not forget to enclose under nuts of fixing bolts of a washer. 2. Tighten both nuts with the required effort, then lower the car on the earth.