Skoda Felicia

since 1994 release

Repair and operation of the car



Skoda Felicia
+ Cars of the Skoda Felicia brand
+ Maintenance instruction
+ Routine maintenance
+ Repair of the engine
+ Cooling systems, heating
+ Power supply system
+ Engine electric equipment
+ Coupling
+ Transmission
+ Power shafts
- Brake system
   General information
   System design, description of separate knots and mechanisms
   Pumping of hydraulic system
   Replacement of hoses and tubes of a hydraulic path of the brake system
   Replacement of blocks of disk brake mechanisms of forward wheels
   Replacement of boots of drum brake mechanisms of back wheels
   Check of a state, removal and installation of disks of forward brake mechanisms
   Removal, check of a state and installation of reels of brake mechanisms of back wheels
   Removal, capital repairs and installation of supports of brake mechanisms of forward wheels
   Removal, capital repairs and installation of wheel cylinders of back brake mechanisms
   Removal, capital repairs and installation of the main brake cylinder (MBC)
   Removal and installation of a pedal of a foot brake
   Check of serviceability of functioning, removal and installation of the vacuum amplifier of brakes
   Removal, check of a state and installation of the control valve of the vacuum amplifier of brakes with a hose
   Adjustment of the parking brake
   Removal and installation of the lever of the parking brake
   Removal and installation of cables of the drive of the parking brake
   Check of serviceability of functioning, removal and installation of the valve regulator of pressure in hydraulic contours of brake mechanisms of back wheels
   Removal, installation and adjustment of the sensor switch of stoplights
   System of anti-blocking of brakes (ABS) - the general information
   Removal and installation of components of the ABS systems
   Removal and installation of the vacuum pump (diesel models)
   Check of a state and capital repairs of the vacuum pump (diesel models)
+ Suspension bracket and steering
+ Body and finishing of salon
+ Onboard electric equipment





Brake system

Specifications

Brake mechanisms of forward wheels
Type Disk Girling
Ø Cylinder of a support, mm 45
Ø Piston, mm 54
Thickness of a brake disk, mm
New disk 12.9
Extreme admissible value 11.4
Maximum admissible side beating of a disk, mm 0.1
Minimum admissible thickness of frictional overlays of brake shoes, mm 2.0
Area of a frictional slip, cm 2 150
Brake mechanisms of back wheels
Type Drum self-established
Ø Wheel cylinder, mm 19
Internal diameter of the brake drum, mm
New drum 200
Extreme admissible value 201
Minimum admissible thickness of frictional overlays of brake boots, mm 2.5
Area of a frictional slip, cm 2 224
Drive of the parking brake Mechanical, hummock
Main Brake Cylinder (MBC)
Internal Ø, mm 22.2
Vacuum amplifier of brakes
Internal Ø, mm 217
Efforts of tightening of threaded connections Nanometer
Bolt of fastening of the wheel ABS sensor 10
Screw of fastening of a disk 8
Support of the forward brake mechanism:
Bolts of the directing fingers 35
Fixing bolts 60
Nut of an axial bolt of the valve of correction of change of loading 20
Nuts of fastening of GTTs 20 ÷ 25
Bolts of fastening of wheels 110
Coupling bolt of the vacuum valve (diesel models) 20
Nuts of fastening of the block of the servo-driver of the vacuum amplifier of brakes 20