Skoda Felicia

since 1994 release

Repair and operation of the car



Skoda Felicia
+ Cars of the Skoda Felicia brand
+ Maintenance instruction
+ Routine maintenance
+ Repair of the engine
+ Cooling systems, heating
+ Power supply system
+ Engine electric equipment
+ Coupling
+ Transmission
+ Power shafts
- Brake system
   General information
   System design, description of separate knots and mechanisms
   Pumping of hydraulic system
   Replacement of hoses and tubes of a hydraulic path of the brake system
   Replacement of blocks of disk brake mechanisms of forward wheels
   Replacement of boots of drum brake mechanisms of back wheels
   Check of a state, removal and installation of disks of forward brake mechanisms
   Removal, check of a state and installation of reels of brake mechanisms of back wheels
   Removal, capital repairs and installation of supports of brake mechanisms of forward wheels
   Removal, capital repairs and installation of wheel cylinders of back brake mechanisms
   Removal, capital repairs and installation of the main brake cylinder (MBC)
   Removal and installation of a pedal of a foot brake
   Check of serviceability of functioning, removal and installation of the vacuum amplifier of brakes
   Removal, check of a state and installation of the control valve of the vacuum amplifier of brakes with a hose
   Adjustment of the parking brake
   Removal and installation of the lever of the parking brake
   Removal and installation of cables of the drive of the parking brake
   Check of serviceability of functioning, removal and installation of the valve regulator of pressure in hydraulic contours of brake mechanisms of back wheels
   Removal, installation and adjustment of the sensor switch of stoplights
   System of anti-blocking of brakes (ABS) - the general information
   Removal and installation of components of the ABS systems
   Removal and installation of the vacuum pump (diesel models)
   Check of a state and capital repairs of the vacuum pump (diesel models)
+ Suspension bracket and steering
+ Body and finishing of salon
+ Onboard electric equipment





Removal and installation of the lever of the parking brake

Lever of the drive of the parking brake

1 — the Lever
2 — the Handle
3 — Pruzhina of the clamp otpuskaniye drive
4 — the clamp otpuskaniye Button

5 — Draft of the drive of an otpuskaniye of a clamp
6 — the Doggie of the ratchet mechanism of a clamp
7 — the Gear sector of the ratchet mechanism

REMOVAL

 PERFORMANCE ORDER

1. For the purpose of ensuring access to a control lever the parking brake remove back section of the central console. On models without console remove a decorative cover of the lever. The design of the lever is presented on an illustration.
2. Completely release lock-nuts, then, having weakened adjusting nuts, provide the maximum weak point of both driving cables. Take the forelock and release an equalizer plate from the lever.
3. Remove a lock ring of fixing of a rotary finger. Take a finger and remove assembly of the lever from the car.

Worn-out components of the ratchet mechanism can be replaced in an individual order.

INSTALLATION

 PERFORMANCE ORDER

1. Before installation make sure of correctness of placement of components of the ratchet mechanism. Slightly grease the mechanism and a nest under landing of an axial finger with universal lubricant.
2. Start the lever on the regular place and implant an axial finger. Record a finger a lock ring, having tracked correctness of landing it in the flute.
3. Connect a plate of the equalizer of a tension of cables to the lever and record it the new forelock.
4. Execute adjustment of the drive of the parking brake (see the Section Adjustment of the Parking Brake).