Skoda Felicia

since 1994 release

Repair and operation of the car



Skoda Felicia
+ Cars of the Skoda Felicia brand
+ Maintenance instruction
+ Routine maintenance
+ Repair of the engine
+ Cooling systems, heating
+ Power supply system
+ Engine electric equipment
+ Coupling
+ Transmission
+ Power shafts
- Brake system
   General information
   System design, description of separate knots and mechanisms
   Pumping of hydraulic system
   Replacement of hoses and tubes of a hydraulic path of the brake system
   Replacement of blocks of disk brake mechanisms of forward wheels
   Replacement of boots of drum brake mechanisms of back wheels
   Check of a state, removal and installation of disks of forward brake mechanisms
   Removal, check of a state and installation of reels of brake mechanisms of back wheels
   Removal, capital repairs and installation of supports of brake mechanisms of forward wheels
   Removal, capital repairs and installation of wheel cylinders of back brake mechanisms
   Removal, capital repairs and installation of the main brake cylinder (MBC)
   Removal and installation of a pedal of a foot brake
   Check of serviceability of functioning, removal and installation of the vacuum amplifier of brakes
   Removal, check of a state and installation of the control valve of the vacuum amplifier of brakes with a hose
   Adjustment of the parking brake
   Removal and installation of the lever of the parking brake
   Removal and installation of cables of the drive of the parking brake
   Check of serviceability of functioning, removal and installation of the valve regulator of pressure in hydraulic contours of brake mechanisms of back wheels
   Removal, installation and adjustment of the sensor switch of stoplights
   System of anti-blocking of brakes (ABS) - the general information
   Removal and installation of components of the ABS systems
   Removal and installation of the vacuum pump (diesel models)
   Check of a state and capital repairs of the vacuum pump (diesel models)
+ Suspension bracket and steering
+ Body and finishing of salon
+ Onboard electric equipment



Removal and installation of a pedal of a foot brake

Components of assembly of a pedal of a foot brake

1 — the Returnable spring
2 — the Axial plug
3 — the Arm
4 — the Rubber washer
5 — the Sensor switch of stoplights
6 — the Lock-nut
7 — the Lock clamp
8 — the Lock clamp

9 — the Rod of a pusher of the vacuum amplifier with a fastening fork to a pedal
10 — the Pedal of a foot brake
11 — the Overlay of a pedal
12 — the Washer
13 — the Nut (15 Nanometers)
14 — the Axis
15 — a coupling Pedal


Models with right-hand steering


The brake pedal is united in uniform assembly with a coupling pedal.

Despite extremely limited access, it is provided replacements of axial plugs of a pedal without dismantle of all assembly. Remove lock rings from both ends of an axis and release plugs from arms. Before installation new plugs should be greased with universal lubricant like Litol 24 or G000062. Track correctness of landing in the flutes of lock rings.

Models with left-side steering

REMOVAL

 PERFORMANCE ORDER

1. Remove a coupling pedal.
2. Release a clamp and release a tip of fastening of a rod of a pusher of the servo-driver of the vacuum amplifier of brakes from a pedal.
3. Unhook a returnable spring from a pedal.
4. Take the axial plug and remove a pedal from a basic arm (together with a returnable spring).
5. Check a pedal for existence of wear tracks or mechanical damages. Special attention should be paid to a condition of the axial plug. Replace defective components.

INSTALLATION

 PERFORMANCE ORDER

1. Grease a nest in pedals, the axial plug and a tip of fastening of a rod of a pusher with universal lubricant like Litol 24 or G000062
2. Correctly connect a returnable spring to a pedal. Having tracked correctness of gearing in a pedal of a rod of a pusher of the servo-driver of the vacuum amplifier of brakes, put the axial plug on the regular place.
3. Level a pedal concerning a pusher and fill into place a fixing tip. Fix a tip by a clamp, having tracked correctness of landing of the last in the flute.
4. Connect a returnable spring to a pedal. Before installation of a pedal of coupling make sure of an isprvnost of functioning of a foot brake.