Skoda Felicia

1. Remove assembly of the lock of a cowl (see the Section Removal, installation and adjustment of assembly of the lock of a cowl).
2. Components of assembly of the drive of an otpuskaniye of the lock of a cowl are presented on an illustration.
3. Moving along a cable, release it from intermediate clamps. Try to remember a route of laying of a cable. Release a cable from the rubber plug of a partition through passage of a motive compartment and tie up to it a thin cord.
4. In interior of the car under the dashboard release a cable tip from the basic arm, then take an axial finger of the lever.
5. Remove assembly of the lever with a cable from the seat (try not to lose the plug through passage) and take it from the car. Having left a cord passed through a partition, untie from it the end of a driving cable. Check a condition of the plug through passage, in case of need make replacement.

1. Make sure that the rubber plug through passage is put on assembly of a cable, then tie up the end of the last to left passed through a partition to a cord and involve it in a motive compartment.
2. Bring a cable cover tip to a basic arm and fix the driving lever of an otpuskaniye of the lock by an axial finger. Make sure of correctness of landing of the plug through passage in a partition of a motive compartment, then untie a cord from a cable.
3. Watching correctness of laying of a cable, fix it in intermediate clamps, then establish into place castle assembly (see the Section Removal, installation and adjustment of assembly of the lock of a cowl).