Skoda Felicia

1. Having accurately hooked, remove the cap plate located behind a protective cover of a control lever of RKPP then turn out the screw of fastening of an overlay of the console located under a plate.

2. Turn off and remove RKPP control lever handle.

3. Having raised a back part of an overlay of the console, release it from clamps and remove together with a protective cover of a control lever of RKPP.

4. Having hooked, remove a cap of the screw of fastening of back section of the central console; turn out the screw.

5. Give forward and back fixture (screws/nut) of the console, then remove both sections of the last from the car.

1. Remove the ware section established between the central console and the dashboard.
2. Having hooked, remove a decorative cover for the purpose of ensuring access to forward nuts of fastening of the console.
3. On the models equipped with electrodriving window regulators / heating of front seats accurately release assembly of the corresponding switches from the top plane of the console, disconnect an electrical wiring.
4. On models with the manual drive of window regulators and without heating of seats remove the ware section established behind RKPP control lever.
5. On all models turn off and remove RKPP control lever handle.
6. Having hooked, remove the cap established in deepening of a back part of back section of the central console and turn out the fixing screw located under it.
7. Give lobbies and back fixing nuts (do not forget about washers) and remove both sections of the central console from the car.

Installation is made upside-down. Track reliability of fixing of components elements of the fixture.