Skoda Felicia

Disconnect a negative wire from the battery.

1. Components of door assembly are presented on an illustration.

2. On models with the manual drive of window regulators having hooked, remove a decorative cover of the handle of lifting/lowering of glass. Turn out the fixing screw and remove the handle from a spindle. Remove a remote washer.

3. Turn out the button of switching off of the door lock, having disconnected it from an executive rod.

4. Lift the internal handle of a door, then carefully release clamps and remove the panel of decorative finishing from the handle.

5. Turn out fixing screws and remove the door handle from the panel of an internal upholstery. In case of need disunite the socket of an electrical wiring of the switch of the electric drive of a rear-view mirror as soon as access to it opens.

6. At the corresponding complete set remove a decorative cap and turn out the screw of fastening of the panel of an internal upholstery to a door.

7. Accurately hooking the panel, release it from clamps and separate from a doorframe. At the corresponding complete set release an electrical wiring from the panel and disunite its sockets.

1. Perform the procedures described in paragraphs with 2 on 5.
2. Accurately hooking the panel, release it from clamps and separate from a doorframe.

Installation is made upside-down. Before latching the panel in clamps, make sure of correctness of laying and threading in the provided electrical wiring openings (at the corresponding complete set).