Skoda Felicia

1. For fastening of panels of internal finishing of salon screws, screws, and also different clamps and latches are used.
2. Make sure that the next panels are not installed with an overlap on subject to removal. Usually panels are removed in strictly certain order which becomes quite obvious at attentive survey.
3. Release all revealed clamps and turn out screws of fastening of the panel. If after that the panel does not give in to removal, it is necessary to examine attentively it regarding identification of the hidden fixture. Usually fixture settles down along the outer edge of the panel. It is necessary for release of the panel, moving on its perimeter, to accurately hook edge the suitable tool as which rather big screw-driver with a flat sting usually not bad approaches. Act carefully, trying not to damage clamps. The clamps broken in the course of dismantle at assembly have to be replaced by new.

In certain cases for removal of the panel it is necessary to release the sealing tape laid along it.

4. Avoid to make excessive efforts at office of the panel. Before make sure that all provided fixture is released and nothing prevents removal.
5. Installation is made upside-down. All fixture damaged in the course of dismantle is subject to replacement. In order to avoid development of extraneous noises and vibrations during the movement track reliability of fixing of the installed panel in all fixing points.

1. The floor of passenger office of interior of the car is usually covered with a whole carpet which edges are fixed by screws or clamps similar with used in panels of decorative finishing.
2. The procedure of removal of a carpet is rather simple, however demands time of considerable expenses of time in view of need of preliminary dismantle of various components impeding the implementation of the procedure, such as seats, central console, lower an anchor of seat belts, etc.

1. The ceiling upholstery fastens to a roof of salon by means of clamps and can be removed only after different preliminary dismantle of auxiliary components, like poruchnevy handles, sun-protection peaks, a windshield and the fixed glasses of back window leaves, adjacent panels of finishing, and also sealing tapes of doorways and the sun-protection hatch.
2. It is necessary to notice that dismantle of a ceiling upholstery demands from the performer of certain skills, and therefore, implementation of the procedure will be more correct to be charged to specialists of car service.