|
1. Connect the cable core to the lever of the lock and put a cover in an arm. Now check correctness of adjustment of hummock assembly.
|
|
2. At the correct connection of a cable to the lock in it there has to be no completely weak point, the lever has to rest against a stopper, and between it and edge of an opening of a finger of the drummer to remain the gap in 3 mm. |
|
|
3. Adjustment is made by an otpuskaniye of a fixing clamp and updating of its provision. Having achieved satisfactory result, strongly to a zastoporta a clamp. |
4. Having finished adjustment, start the lock under a cross beam of a front and put him on the regular place. Screw fixing bolts, make sure of correctness of position of a finger of the drummer, then tighten fixture with the required effort.
5. Grease lock components with universal lubricant, then check serviceability of functioning of assembly. In case of need position of a finger of the drummer can be corrected by an otpuskaniye of bolts of a fixing plate and updating of the provision of the last on a cowl. Having achieved satisfactory result, tighten fixing bolts. Pay attention that length of a finger of the drummer determines height of landing of a cover of a cowl in a closed position (see the Section Removal, installation and adjustment of a cowl). |
