Skoda Felicia

1. On release models till 1998 remove both forward indexes of turn. Through the formed openings turn out the left and right bolts of fastening of the panel of a front. Also give two screws of fastening of the top part of the panel to a cross beam of the lock of a cowl. Give fixing nuts from the back party of the panel of a front, then remove the panel from the car.

2. On models of late years of release turn out two fixing screws, then release clamps and remove the decorative slips established between head block headlights and a bumper.
3. For the purpose of ensuring the best access firmly cock the parking brake, then a front of the car and establish to a poddomkratta it on props
4. On the models equipped with forward fog lights disconnect an electrical wiring from assemblies of the last and take away it from a bumper.
5. On the models equipped with washers of lenses of head headlights remove both block headlights. Release collars and disconnect hoses from a back part snuffled washers, having provided a possibility of extraction of the last of the bumper assembly.

6. On all models give two nuts of fastening of the top part of a bumper on a car front. Do not forget to remove washers.

7. Under the car give nuts of fastening of the central support of a bumper on a car front.

8. Weaken nuts of fastening of the left and right ends of a bumper to the support (finally it is optional to remove nuts as fixing openings have the oval form). By means of the assistant shift the bumper assembly forward and remove it from the car.

Installation is made upside-down. Track reliability of tightening of fixture.