Skoda Felicia

since 1994 release

Repair and operation of the car



Skoda Felicia
+ Cars of the Skoda Felicia brand
+ Maintenance instruction
+ Routine maintenance
+ Repair of the engine
+ Cooling systems, heating
+ Power supply system
+ Engine electric equipment
+ Coupling
+ Transmission
+ Power shafts
+ Brake system
+ Suspension bracket and steering
+ Body and finishing of salon
- Onboard electric equipment
   General information and precautionary measures
   Search of causes of failures of electric equipment
   Safety locks, the relay and breakers - the general information
   Removal and installation of switches
   Replacement of lamps of external lighting and alarm fixtures
   Replacement of lamps of internal lighting fixtures
   Removal and installation of assemblies of external lighting and alarm fixtures
   Adjustment of the direction of an optical axis of head headlights - the general information and replacement of the mechanism of the regulator
   Removal and installation of an instrument guard
   Removal and installation of a cable of the drive of a speedometer
   Removal and installation of the lighter
   Removal and installation of a horn of a horn
   Removal and installation of levers of screen wipers
   Removal and installation of an electric motor and drafts of the drive of screenwashes
   Removal and installation of an electric motor of the drive of a cleaner of back glass
   Removal and installation of components of washers of wind glass / lenses of head headlights / back glass
   Removal and installation of the autoradio tape recorder
   Removal and installation of loudspeakers
   Removal and installation of the antenna of the radio receiver
   Anticreeping alarm system / system of an immobilization of the engine
   Removal and installation of components of a heating system of front seats
   Safety cushion - the general information, precautionary measures and deactivation of system
   Removal and installation of components of system of safety cushions
   Diagnostics of electronic control systems of the engine and systems of safety
   + Schemes of electric connections





Replacement of lamps of internal lighting fixtures

General information

See paragraph 1 of the Section Replacement of Lamps of External Lighting and Alarm Fixtures.

Forward saloon lamp


 PERFORMANCE ORDER

1. Having accurately hooked the screw-driver, release the lamp from a ceiling upholstery of salon.

2. Open a cover and release a lamp of scalloped type from spring contacts.

3. Installation is made upside-down. Track reliability of fixing of a lamp in spring contacts.


Back saloon lamp

 PERFORMANCE ORDER

1. Having hooked the small screw-driver, remove a plafonny lens.
2. Release a lamp from contacts of the holder and take a lamp lamp.
3. Installation is made upside-down. Track reliability of fixing of a lamp in spring contacts.


Lamp of lighting of the luggage compartment

 PERFORMANCE ORDER

1. Having accurately hooked the small screw-driver, release the lamp from the panel of side finishing.

2. Release a lamp of scalloped type from spring contacts.

3. Installation is made upside-down. Track reliability of fixing of a lamp in spring contacts.

Illumination of devices and control lamps

 PERFORMANCE ORDER

1. Remove an instrument guard (see the Section Removal and installation of an instrument guard).

2. For removal of a lamp turn assembly of the corresponding boss counterclockwise and take it from the panel of an instrument guard. Extraction of a lamp from the boss is not possible. Cartridges of lamps with a power of 1.2 W are painted in blue light, 2 W - in green.

3. Installation is made upside-down. The description of the procedure of installation to the place of an instrument guard is provided in the Section Removal and installation of an instrument guard.


Illumination of the control panel of functioning of a heater

 PERFORMANCE ORDER

1. Remove an ashtray.

2. Having accurately hooked, remove the facing panel from assembly of management of functioning of a heater.

3. Remove handles of management, then facing of lamps.

4. Lamps of illumination are equipped with socles of press type and are just extended from the nests.

5. Installation is made upside-down. Track reliability of fixing of lamps in contacts.