Skoda Felicia

since 1994 release

Repair and operation of the car



Skoda Felicia
+ Cars of the Skoda Felicia brand
+ Maintenance instruction
+ Routine maintenance
- Repair of the engine
   - Repair without extraction from the car of the petrol engine of 1.3 l
      Description of the main knots and mechanisms
      Check of a condition of conrod and piston group on hearing and measurement of compression pressure in cylinders
      Reduction of the piston of the first cylinder in the provision of the top dead point (TDP)
      Removal and installation of a cover of a casing of the camshaft
      Removal, check of a state and installation of assembly of an axis of yokes
      Removal and installation of a head of cylinders assembled with the inlet pipeline and a final collector
      Removal, check of a state and installation of a forward cover, chain and asterisks of the GRM drive
      Removal, check of a state and installation of components of the oil pump
      Removal and installation of the pallet of a case of the engine
      Replacement of epiploons of a bent shaft
      Removal, check of a state and installation of a flywheel
      Check of a state and replacement of rubber pillows of support of a suspension bracket of the power unit
      Removal, installation and adjustment of effort of a tension of a belt of the drive of auxiliary units
   + Repair without extraction from the car of the petrol engine of 1.6 l
   + Repair without extraction from the car of the diesel engine
   + Dismantle of the power unit and capital repairs of the engine
+ Cooling systems, heating
+ Power supply system
+ Engine electric equipment
+ Coupling
+ Transmission
+ Power shafts
+ Brake system
+ Suspension bracket and steering
+ Body and finishing of salon
+ Onboard electric equipment





Removal and installation of a cover of a casing of the camshaft

REMOVAL

 PERFORMANCE ORDER

1. Disconnect a negative wire from the battery.
2. Disconnect ventilating hoses from a jellied mouth of motive oil on a cover of a head of cylinders.

3. Give two nuts of fastening of a cover of a head of cylinders and take rubber inserts.

4. Uncover a head of cylinders and accurately release sealing laying from a landing flute. Check a condition of laying.

INSTALLATION

 PERFORMANCE ORDER

1. Carefully smooth out the interfaced surface of a head of cylinders and a flute under installation of laying in its cover. Traces of oil have to be completely removed. Fill laying in a flute on a cover, having tracked correctness of its laying on all length.

2. Watching that laying did not jump out of a flute, establish a cover on a head of cylinders. Fill rubber inserts and screw fixing nuts on hairpins. Tighten nuts with the required effort.

3. Connect ventilating hoses to a jellied mouth of motive oil, having strongly fixed them by collars of screw or worm type.

4. In conclusion connect a negative wire to the battery. Start the engine and check it for existence of signs of leak of oil.