|
1. Prop up forward wheels, then a back of the car and establish to a poddomkratta it on props.
2. Bystry check of residual thickness of frictional overlays of boots can be made through an opening in a board of the brake mechanism - at the corresponding complete set take the rubber plug through passage from an opening. Assessment of thickness of a slip is made by pressing to its side surface of a core which diameter is equal to the minimum admissible thickness of a slip. In case of need use a pocket small lamp. At wear below an admissible limit of an overlay at least of one of boots all four boots are subject to replacement (on both back brake mechanisms).
3. For more detailed check of components of the brake mechanism (see the Head the Brake system) it is necessary to remove and clean a drum. |
