|
1. Release four wire clamps located on perimeter of the top cover of a casing of the air cleaner.
2. Now the cover can be raised so that the possibility of extraction from a casing of the air cleaner of the filtering element appeared - try to remember adjusting position of the last.
3. In case of need providing bigger working space with suitable flat-nose pliers squeeze legs of a spring collar of fastening to the top cover of a sleeve of an air inlet. Disconnect a sleeve from a branch pipe of a cover and remove the last from a casing.
4. Remove dust and small garbage from an air cleaner casing.
5. According to landing marking establish the replaceable filtering element. Track reliability of landing of edges of the filter.
|
|
6. Establish into place the top cover and record it four wire clips. If removed, connect an air inlet sleeve to a cover. Fix a sleeve by a spring collar. |
|