|
1. The condition of an auxiliary driving belt can be checked visually. It is necessary to pay attention to existence of attritions, cracks, stratifications and so forth. Defektov. For survey of the ridge party of a belt overwind it.
2. For the purpose of ensuring the best access to a belt to a poddomkratta the right forward corner of the car, then turn out screws of fastening of the metal cover covering a belt.
|
|
3. For survey of a belt on all its length turn a bent shaft for a bolt of its pulley. It is better to examine from below. |
4. In case of detection of defects the belt is subject to replacement (see the Head Remont of the engine).
5. On diesel models the auxiliary driving belt is equipped by an automatic natyazhitel and does not need adjustment of effort of a tension.
6. In conclusion, if removed, establish into place a belt cover, then lower the car on the earth. |
