|
1. On the models equipped with side safety cushions disconnect a negative wire from the battery and before starting performance of work, wait not less than one minute.
|
|
2. On all models shift the seat which is subject to removal against the stop back, then turn out forward bolts of fastening of the directing runners. |
|
|
3. Now shift a seat against the stop forward and give back bolts of fastening of the directing runners. Remove washers. |
4. Accurately remove a seat from the regular place.
|
|
At the corresponding complete set do not forget to disconnect an electrical wiring from a working element of heating of a seat / side safety cushions. |
|