Skoda Felicia

since 1994 release

Repair and operation of the car



Skoda Felicia
+ Cars of the Skoda Felicia brand
+ Maintenance instruction
+ Routine maintenance
+ Repair of the engine
+ Cooling systems, heating
+ Power supply system
- Engine electric equipment
   - Systems of a charge and start
      General information and precautionary measures
      Check of a state and battery charging
      Removal and installation of the rechargeable battery
      Check of serviceability of functioning of system of a charge
      Removal and installation of the generator
      Replacement of the module of the brush holder/regulator of tension
      Check of serviceability of functioning of system of start
      Removal and installation of a starter
      Capital repairs of a starter
   + System of ignition of petrol engines
   + System of preheat of diesel engines
+ Coupling
+ Transmission
+ Power shafts
+ Brake system
+ Suspension bracket and steering
+ Body and finishing of salon
+ Onboard electric equipment



Replacement of the module of the brush holder/regulator of tension

 PERFORMANCE ORDER

1. Remove the generator (see the Section Removal and installation of the generator).
2. Lay the removed generator on a pure working surface a pulley down.

3. On diesel models and models of 1.6 l give fixing screws, release clamps and remove a back plastic cover from the generator.

4. Turn out screws of fastening of the module of the brush holder/regulator of tension, disunite the electric socket of m remove the module from the generator.

5. Check the free length of a vystupaniye of brushes from holders - measurement is performed from a brand on brushes to bottom edge of development of a contact surface. Compare results of measurements to requirements of Specifications. In case of need make replacement of the module.

6. Check a condition of working surfaces of the sliding rings on the end of a shaft of the generator. In case of identification of signs of excessive wear, cavities or traces of progar, ask for the help specialists of car service.

7. Working upside-down, collect the generator and install it on the place (see the Section Removal and installation of the generator).