|
|
1. The condition of an auxiliary driving belt can be checked visually. It is necessary to pay attention to existence of attritions, cracks, stratifications and so forth. Defektov. For survey of the ridge party of a belt overwind it. |
|
|
2. For the purpose of ensuring the best access to a belt to a poddomkratta the right forward corner of the car, then turn out screws of fastening of the metal cover covering a belt. |
3. For survey of a belt on all its length turn a bent shaft for a bolt of its pulley.
4. In case of detection of defects the belt is subject to replacement (see the Head Remont of the engine).
5. On models of 1.6 l (and models of 1.3 l equipped To/in) the belt is equipped by an automatic natyazhitel, and therefore does not need adjustment of effort of a tension.
6. On models of 1.3 l without To/in check of effort of a tension of a belt it can be made by a nazhimaniye on it on the site in the middle between pulleys of the generator and water pump. At a firm nazhimaniye a hand thumb the size of a deflection of a belt has to lie ranging from 10 mm to 15 mm. Otherwise it is necessary to make adjustment (see the Head Remont of the engine).
7. In conclusion, if removed, establish into place a belt cover, then lower the car on the earth. |
