Skoda Felicia

since 1994 release

Repair and operation of the car



Skoda Felicia
+ Cars of the Skoda Felicia brand
+ Maintenance instruction
- Routine maintenance
   Weekly checks
   - Routine maintenance of the car - petrol models
      Schedule of routine maintenance
      Regular service
      Replacement of motive oil and oil filter
      Check of a condition of blocks and disks of forward brake mechanisms
      Check of serviceability of functioning of a control system of the engine
      Check and adjustment of valvate gaps (model of 1.3 l)
      Check of a condition of hoses, and identification of sources of leaks
      Check of a condition of protective covers of power shafts
      Suspension bracket and drive of steering
      Check of a condition of components of system of production of the fulfilled gases
      Check of a condition of cooling liquid
      Check of serviceability of functioning of coupling
      Greasing of locks and loops
      Check of composition of the fulfilled gases
      Adjustment of an optical axis of head headlights
      Check of serviceability of functioning of cleaners/washers of glasses/lenses of head headlights
      Trial runs
      Replacement of the filtering air cleaner element
      Replacement of spark plugs - models of 1.3 l
      Check of a condition of a belt of the GRM drive - model of 1.6 l
      Greasing of the distributor of ignition - model of 1.3 l
      Check of a condition of a belt of the drive of auxiliary units
      Check of system of safety cushions
      Check of serviceability of functioning of systems of decrease in toxicity of the fulfilled engine gases
      Check of a condition of boots and drums of back brake mechanisms
      Check of serviceability of functioning of the parking brake
      Check of body panels on existence of traces of development of corrosion
      Check of level of gearbox oil
      Replacement of spark plugs - models of 1.6 l
      Replacement of the fuel filter
      Replacement of gearbox oil
      Replacement of a gas-distributing belt - model of 1.6 l
      Replacement of brake fluid
      Replacement of cooling liquid
   + Routine maintenance of the car - diesel models
+ Repair of the engine
+ Cooling systems, heating
+ Power supply system
+ Engine electric equipment
+ Coupling
+ Transmission
+ Power shafts
+ Brake system
+ Suspension bracket and steering
+ Body and finishing of salon
+ Onboard electric equipment





Replacement of the filtering air cleaner element

Models of 1.3 l with SPFI

 PERFORMANCE ORDER

1. Release the wire clamps located on perimeter of the top cover of a casing of the air cleaner.

2. Turn out three fixing bolts and...

... accurately lift a cover having provided free access to the filtering element. Try not to shift an air cleaner casing in the course of removal of a cover.

3. Take the filtering element from an air cleaner casing.

4. Remove dust and small garbage from an air cleaner casing (try that dirt did not get into a throttle case mouth. Wipe internal surfaces of a casing and a cover of the air cleaner.
5. According to landing marking establish the replaceable filtering element.
6. Close an air cleaner cover, screw three fixing bolts and tighten them with the required effort.
7. Latch side clamps of a cover.


Model 1.3 from MPFI and 1.6 l

 PERFORMANCE ORDER

1. Release four wire clamps located on perimeter of the top cover of a casing of the air cleaner.

2. Now the cover can be raised so that the possibility of extraction from a casing of the air cleaner of the filtering element appeared - try to remember adjusting position of the last.

3. In case of need providing bigger working space with suitable flat-nose pliers squeeze legs of a spring collar of fastening to the top cover of a sleeve of an air inlet. Disconnect a sleeve from a branch pipe of a cover and remove the last from a casing. Alternatively, uncover together with a throttle case cover.
4. Remove dust and small garbage from an air cleaner casing.
5. According to landing marking establish the replaceable filtering element. Track reliability of landing of edges of the filter.
6. Establish into place the top cover and record it four wire clips. If removed, connect an air inlet sleeve to a cover. Fix a sleeve by a spring collar. If uncovered, without disconnecting a sleeve (together with a throttle case cover), address the Head's materials the Power supply system.