|
1. Prop up forward wheels, then a back of the car and establish to a poddomkratta it on props.
|
|
2. Bystry check of residual thickness of frictional overlays of boots can be made through an opening in a board of the brake mechanism - at the corresponding complete set take the rubber plug through passage from an opening. Assessment of thickness of a slip is made by pressing to its side surface of a core which diameter is equal to the minimum admissible thickness of a slip. In case of need use a pocket small lamp. At wear below an admissible limit of an overlay at least of one of boots all four boots are subject to replacement (on both back brake mechanisms). |
3. For more detailed check of components of the brake mechanism (see the Head the Brake system) it is necessary to remove and clean a drum. |