Skoda Felicia

since 1994 release

Repair and operation of the car

Skoda Felicia
+ Cars of the Skoda Felicia brand
+ Maintenance instruction
+ Routine maintenance
+ Repair of the engine
+ Cooling systems, heating
+ Power supply system
+ Engine electric equipment
+ Coupling
+ Transmission
- Power shafts
   General information
   Removal and installation of power shafts
   Replacement of rubber protective covers of CV JOINTS of power shafts
   Removal and installation of a vibration damper of the right power shaft
   Capital repairs of power shafts - the general information
+ Brake system
+ Suspension bracket and steering
+ Body and finishing of salon
+ Onboard electric equipment

Removal and installation of a vibration damper of the right power shaft



1. Firmly cock the parking brake, then the car and establish to a poddomkratta it on props.

2. Turn out fixing screws, divide assembly of a vibration damper into two half and remove them from a shaft.

3. Check rubber elements of a damper for existence of signs of wear or aging of material. In case of need make replacement. Rubber elements are pasted to a damper body. Manufacturers of the car (Skoda company) recommend to use adhesion of Champion 25.



1. Carefully wipe the interfaced surfaces of a damper and a power shaft.
2. Establish half of damping assembly on a shaft, having tracked correctness of combination of the directing ledges. Screw fixing screws and tighten them with the required effort. Now the car can be lowered on the earth.