System of ventilation of a case - the general information
General information
The system of catching of fuel evaporations consists of the valve of a purge filled with absorbent carbon of an adsorber and connecting hoses.
The valve of a purge is installed in an arm on a back part of a mudguard of an arch of the left wheel. The adsorber is fixed by a special collar behind the valve. Replacement of components
Adsorber purge valve
PERFORMANCE ORDER
1. Switch off ignition, then disconnect an electrical wiring from the valve.
2. Having pulled the valve up, release its rubber support from a fixing collar.
3. Release collars and disconnect rubber hoses from the valve, having just in case marked them in order to avoid confusion at connection. 4. Installation is made upside-down.
Coal adsorber
PERFORMANCE ORDER
1. Disconnect from the top part of an adsorber the hoses brought to it going from the fuel tank and the valve of a purge.
2. Turn out a coupling bolt of a fixing collar and remove an adsorber).