Skoda Felicia

since 1994 release

Repair and operation of the car



Skoda Felicia
+ Cars of the Skoda Felicia brand
+ Maintenance instruction
+ Routine maintenance
+ Repair of the engine
+ Cooling systems, heating
- Power supply system
   + Power supply system of the carburetor engine of 1.3 l
   + System of the central injection (SPFI) of the petrol engine
   + System of the distributed injection (MPFI) of the petrol engine
   + Power supply system of the diesel engine
   - Systems of decrease in toxicity and production of the fulfilled gases
      System of catching of fuel evaporations - the general information and replacement of components
      System of ventilation of a case - the general information
      Removal and installation of the l-probe
      System of recirculation of the fulfilled gases (EGR) - the general information and replacement of components
      Removal and installation of a final collector
      System of release - the general information and replacement of components
      The catalytic converter - the general information and precautionary measures
+ Engine electric equipment
+ Coupling
+ Transmission
+ Power shafts
+ Brake system
+ Suspension bracket and steering
+ Body and finishing of salon
+ Onboard electric equipment



System of ventilation of a case - the general information

General information

The system of catching of fuel evaporations consists of the valve of a purge filled with absorbent carbon of an adsorber and connecting hoses.

The valve of a purge is installed in an arm on a back part of a mudguard of an arch of the left wheel. The adsorber is fixed by a special collar behind the valve.

Replacement of components

Adsorber purge valve

 PERFORMANCE ORDER

1. Switch off ignition, then disconnect an electrical wiring from the valve.

2. Having pulled the valve up, release its rubber support from a fixing collar.

3. Release collars and disconnect rubber hoses from the valve, having just in case marked them in order to avoid confusion at connection.
4. Installation is made upside-down.


Coal adsorber


 PERFORMANCE ORDER

1. Disconnect from the top part of an adsorber the hoses brought to it going from the fuel tank and the valve of a purge.

2. Turn out a coupling bolt of a fixing collar and remove an adsorber).