|
1. Uncover, installed on the throttle case (see the Section Removal and installation of assembly of the air cleaner).
|
|
2. On the case of a throttle disconnect the cable core from a plate of a spindle of a butterfly valve - the core should be delayed, and then to disconnect a cable tip. |
|
|
3. Remove a lock cap from the external end of a cover of a cable. |
|
|
4. Stretch a cable through the rubber plug through passage, having released it from a basic arm., then release the rubber plug through passage which then can be thrown off from a cover from a basic arm. |
|
|
5. In interior of the car disconnect an internal tip of a cable from the plug on the top end of the accelerator pedal. |
|
|
6. Release a cable from intermediate guides of clamps and pass through it through a partition of a motive compartment (try not to damage the rubber plug through passage). |
|