|
1. Take off a belt of the drive of auxiliary units (see the Section Removal, installation and adjustment of effort of a tension of a belt of the drive of auxiliary units).
2. Remove pulleys of an auxiliary belt and the top cover of a belt of the GRM drive, then bring the piston of the first cylinder into the provision of VMT of the end of a step of compression and take off a gas-distributing belt with a natyazhitel and a cogwheel of an intermediate shaft (see the Sections Reduction of the Piston of the First Cylinder in the provision of the top dead point (TDP) of the end of a step of compression, Removal and installation of a belt of the GRM drive and its covers, Removal, check of a state and installation of cogwheels and a natyazhitel of a belt of the GRM drive).
3. Remove a flange of an intermediate shaft and replace epiploons.
4. Install all components removed for the purpose of ensuring access and adjust efforts of a tension of belts. |